Issue Number 195

October 2017

 

ISSUE AVAILABLE
Back issues still available can be purchased at a cost of $4.30 inc postage for each issue.

Add to Shopping Cart

What's in my cart?


Laminated Bowls from a Single Board


Turning Musical Percussion Instruments


A Little Unicorn


Market Wares #24
The Napkin Holder


Wine Bottle Holder


Tambour Box


Faceted Wooden Bowls - 1

 

 

Table of Contents

Features

Sanders & How to Choose One
Sanders are not all alike, so knowing how each type of sander works is crucial to being able to select an appropriate portable sander for your needs. To further assist you to make the right purchase, we have compiled a survey of the portable routers currently available.

Club Drumbeat
Altona Woodworkers Inc (VIC) utilises older style heavy duty industrial woodworking machinery to produce their woodwork, Lara Woodworkers Inc (VIC) celebrate 25 years and the Port Stephens Community Woodworkers Inc (NSW) produce a range of woodworking kits which are delivered to local primary schools and nursing homes, to be assembled by children and the elderly.

From Warfare to Woodworking
The slicing action of true helix spiral cutters as found in planers and thicknessers can be equated with the slicing stroke of various curved swords used in warfare through the ages.

Notes on Woodturning Part 36 - Twin Naval Woodturners
by John Ewart
With a disciplined approach to their activities, defence force personnel often become keen woodworkers when they take up the craft. Twins, Chief Petty Officer Col Frampton and Petty Officer David Frampton, are a good example, with Col even taking his midi lathe to sea.

The Moisture Content of Wood
The #46 instalment in our Beginner's Series, we look at the importance of moisture content when selecting the material for a specific project. Depending on the workpiece, ignoring the effect of moisture content during the design and construction can lead to cracking, warping and other failures.

Sharpening Skews and Detail Gouges
by Mike Darlow
A keen proponent of finding the best way to turn, Mike is concerned at the proliferation of advice that ignores the physics of the turning process. He discusses the sharpening of skews and detail gouges and supports his contention that an understanding of the forces involved in using the tool on the lathe will assist you to sharpen the skew or detail gouge for better results.

Projects

Laminated Bowls from a Single Board
by John Di Stefano
While laminated work can be similar in appearance to segmented work, it is made in quite a different manner. These laminated bowls are made from cutting rings from a laminated board and then re-assembling them into a bowl blank (effectively a second lamination). John discusses his method and the software he uses to mark out the rings required.

Turning Musical Percussion Instruments
by Aaron Ehrlich
Many percussion instruments require a turned body or turned components. Aaron illustrates eight traditional percussion instruments which are both easy and fun for the woodturner to make.

A Little Unicorn
by Carolyn McCully
This relatively simple burn provides the opportunity to experiment with your spoon shader and the use of colour. Carolyn provides tips for your pyrography and colouring, based on unexpected difficulties she encountered with this piece.

Market Wares #24 The Napkin Holder
by Don Phillips
A fairly simple design that is easy to make in batches, this wooden napkin holder is a very handy means of placing napkins on a table for easy access by guests while preventing them from being blown about in the breeze.

Wine Bottle Holder
by John Swinkels
Single wine bottle holders which balance the bottle in mid-air have been around for years. There are many examples on the Internet, but John noticed that few designs involved turning. He developed his own design, based on a spindle turning with a captive ring.

Tambour Box
by Reg Cooke
Offcuts from guitar-making inspired this project, though the final piece did not incorporate the original offcuts. The innovative design incorporates a number of unusual features and involved a fair amount of trial and error to get the whole thing to work properly.

Faceted Wooden Bowls - 1
by Richard Collins
While round bowls are typically turned, square and polygonal bowls can be made by cutting faceted segments on a compound mitre saw and assembling them in the appropriate sequence. Richard explains the steps involved.

Other Features

New Products